LED通販德國UV-DESIGN 151 能量計
進口UV能量計UV-DESIGN
國際知名廠牌
UV焦耳計
原裝品質
操作簡單
精準測量
光譜測量範圍 :250-410nm
大部份的UV光皆能測試
市面上太多假貨 外殼很像.用沒多久就壞掉 送到總公司,一拆電路板就知道假貨 勿買來路不明大陸,拍賣小賣家貨 產品有一定行情,便宜都是假貨
歡迎公司/企業/學校採購 量出準確的數據才是重要 後面調效才不會做白工
#原廠公司貨,100%德國進口
公司 控制網路價格
要便宜.要折扣請發信
或是來電詢問
#7種偵測波長,正確選擇所需波長範圍.只能選一種
UV 151 ,type 1 350~460nm(Diazo)
UV 151 ,type 2 315~400nm(UV-A) 最多人選購這款, 默認這款出貨.
UV 151 ,type 21 380~420nm(UV LED)
UV 151 ,type 3 250~410nm(Standard)
UV 151 ,type 4 280~315nm(UV-B)
UV 151 ,type 5 230~280nm(UV-C)
UV 151 ,type 6 395~445nm(UV-V)
UV-Integrator 151
The mini UV-Integrator
The UV-Integrator 151 is a high quality UV measuring instrument. It is used to measure UV energy of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying processes.
Small size, heavy duty pass-through Integrator with very small dimensions. It is reliable and simple to use.
The UV-Integrator 151 is available in various different measuring ranges*: (Please state upon order)
Item 7.1 UV-Integrator 151, Type 1, Diazo 350 – 460 nm Item 7.2 UV-Integrator 151, Type 2, UV-A 315 – 400 nm Item 7.21 UV-Integrator 151, Type 21, UV-LED 380 – 420 nm Item 7.3 UV-Integrator 151, Type 3, UV 250 – 410 nm Item 7.4 UV-Integrator 151, Type 4, UV-B 280 – 315 nm Item 7.5 UV-Integrator 151, Type 5, UV-C 230 – 280 nm Item 7.6 UV-Integrator 151, Type 6, UV-V 395 – 445 nm
*further spectral ranges available upon request
By addition of the incidence of the light quantities during the exposure cycle, relative values are calculated. Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear under the same measurement conditions.
Technical Data:
Spectral range:UV 250-410 nm
Measuring range:0 to 5000mW/CM2
Display:6-digit LCD
Display range:0 to 999,999 mJ/cm2
Power source:long life 3.6 V Lithium Battery
Power consumption: 100 μA 10,000 hrs
Battery service life: Dimensions:3” x 2” (80 x 55 mm)height .5” (12 mm)
Weight:approx. 3.5 ounce (100 g.)
Temperature range/Heat protection:0 to 45° Celsius
Base Accuracy:Heat shield on back plate ± 5 %
In the standard version it is measuring an integral
in the spectral rangefrom 250-410 nm, with a peak
at the area of 330 nm.
While on the conveyer belt, the UV-Integrator 151 can withstand max.
110° C / 230° F for up to 10 seconds.
The temperature of the housing should not exceed 45° C / 113° F.
Calibration:
In order to keep its full function and precision it is recommended to
have re-calibration done once per year. Re- calibration will also
be necessary after change of battery. Ongoing, PTB traceable
calibration with certificate
Warranty: 2 years from the date of purchase, for the German quality
battery we guarantee one year
產地：德國
品名： 進口UV能量計UV-DESIGN 151
應用領域： UV 印刷、塗料、膠水、油墨的固化、乾燥、上光等多種領域。
應用行業： 手機外殼， PCB,UV 板，地板，塑膠按鍵等電子行業及其他多種行業。
適用設備： UV LED 光源，曝光機，曬版機， UV 爐，光固機，隧道烘乾機，紫外線燈管等多 種相關設備和產品。
建議售價:31800 2022最新價格
注意事項：
UV 能量計主要用於低淨化空間之 UV 乾燥裝置等設備的 UV 能量，
勿直視或非直視即通過折射 / 反射 UV 燈，
保證身體的任何部位均不受 UV 燈直射。
UV 乾燥裝置所在工廠的防塵，淨化是否充分。
安裝 / 操作 :
a ．打開 ON 開關，則 LCD （顯示幕）是顯示為零。
b ．將焦耳計放置於曝光燈燈源附近，儘量做到以其背面對準燈源（圖焦耳計的能量感受器在背面），曝光時間作適當延長。
c ．直到焦耳計的顯示幕上有測量顯示，例如 1,000( 1000m j/cm2)
 |
|
上架日期2018/03/14